Raspberry Pi Pinout
1 Wire Pi Plus
The 1 Wire Pi Plus from AB Electronics UK is a communication board supporting the 1-Wire® protocol designed for use on the Raspberry Pi and other compatible single-board computers. A 5V buffered I2C port is also provided on the board.
The 1-Wire® port on the 1 Wire Pi Plus is based around a DS2482-100 I2C to 1-Wire® bridge device. The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices. An ESD Protection Diode is used to protect the 1 Wire Pi Plus and Raspberry Pi from electrostatic spikes on the 1-Wire® port. Connections to the 1-Wire® port can be made through the RJ-12 socket or the solder points on the PCB.
I2C address select solder jumpers give you the ability to set the I2C address of the 1 Wire Pi Plus allowing the board to be used with other I2C devices on the same bus.
Space is provided on the board for a 1-Wire® iButton device. iButtons are small metal-packed modules that can be used for many functions, from data loggers to temperature monitoring.
Features
- 1-Wire® to I2C host interface with ESD protection diode.
- Stackable with other Raspberry Pi accessory boards.
- Buffered 5V I2C port.
- External 5V power input for the 1-Wire® interface.
- I2C address selection via solder jumpers.
Installing OWFS and Python OW on the Raspberry Pi
Details
|  |